XOD H800 / H880 Hydraulic Disc Brakes for Electric Scooters

Choose an XOD H800 or H880 hydraulic disc brake option for your electric scooter. Match the mounting direction, disc size, bracket and electrical connector before ordering.

Listed specifications

• Brand: XOD
• Models: H800 / H880
• Brake cut-off connector: 2-pin
• Listed front hose length: approximately 1,350 mm
• Listed rear hose length: approximately 2,150 mm
• Listed weight: approximately 1 kg per set

Choose the correct mounting arrangement

The supplier lists H800 as right-mounted at the rear and left-mounted at the front, and H880 as left-mounted at the rear and right-mounted at the front. Have your repair technician confirm the correct arrangement for your scooter and selected option.

Important fitting requirements

The listed standard mounting bracket is for a 140 mm disc. A 160–180 mm disc requires a corresponding mounting bracket purchased separately.

Do not raise a 140 mm bracket with shims to fit a larger disc. The supplier warns that this can cause brake-pump fracture.

The supplier lists the KuKirin G4 as requiring a 160 mm bracket and a brake power-off adapter cable, purchased separately.

KuKirin G2 Pro 2025 fitting requires particular care: the supplier mentions additional brake-disc spacers but also warns against shimming the brake bracket. These are not interchangeable instructions. Have a qualified repair technician confirm the required hardware before purchasing or installing.

Check before ordering

• Confirm your scooter model and version, disc diameter, mounting side and connector.
• Check what is included in your selected option. Do not assume brackets, discs or adapter cables are included.
• Have a qualified scooter repair technician confirm compatibility and carry out installation.

Scooter photos are for illustration only. A scooter is not included.